Standen Unistar 2400, Руководство оператора

Страница: 27 / 29

Daily Maintenance
During the working season the following daily maintenance should be carried out.
Check all covers and guards are in position, free from damage, and all retaining
latches and hinges are in place and operative. Repair or replace any found to be
defective before operating the machine.
Carry out the following checklist: -
1.
Check tension of all drive belts and adjust if necessary.
2.
Check tyre pressures and adjust if necessary.
3.
Check for any damaged or broken rollers, web bars or stars etc. Repair or
replace as necessary.
4.
Check wheel nuts for tightness.
5.
Check all scraper clearances and adjust as necessary. Scrapers should be
adjusted as close as possible without actually touching.
6.
Check all hydraulic cylinders, valves and pipe work for signs of leaks or
damage, repair or replace as necessary.
7.
Carry out lubrication
8.
Grease axle king pins
Weekly Maintenance
During the working season the following weekly maintenance should be carried out.
1.
Carry out all the procedures listed in daily maintenance.
2.
Check all shafts, bearings and rollers for undue wear, and replace as
necessary.
3.
Check all bearings for lubrication, grease as necessary.
4.
Check discs and shares blades for excessive wear, replace if necessary.
5.
Check hydraulic and gearbox oil levels.
Annual Maintenance
Prior to the start of the working season the following maintenance should be carried
out.
1.
Carry out all the procedures listed in daily and weekly maintenance.
MAINTENANCE 1.22