Standart Horizont GX2000, Руководство пользователя

Страница: 35 / 136

Page 35 GX2000/GX2100
10.6 USA, CANADA, AND INTERNATIONAL MODE
To change the channel group from USA to Canada or International:
1. Press and hold down the [ CALL
(
MENU
)] key
until “
Setup Menu
” appears.
2. Rotate the CHANNEL knob to select “
CH
FUNCTION SETUP
”.
2. Press the [ SELECT
] soft key, then rotate the
CHANNEL knob to select “
CH GROUP
”.
3. Press the [ SELECT
] soft key.
4. Rotate the CHANNEL knob to select desired
channel group “
USA
”, “
INTL
”, or “
CANADA
”.
5. Press the [ ENT
] soft key to store the selected set-
ting.
6. Press the [ QUIT
] soft key several times to return to radio operation.
10.7 NOAA WEATHER CHANNELS
1. To receive a NOAA weather channel, press and hold the [ CLR
(
WX
)] key
for 2 seconds from any channel. The transceiver will go to the last selected
weather channel.
2. Rotate the CHANNEL knob to select a different NOAA weather channel.
3. To exit from the NOAA weather channels, press the [ CLR
(
WX
)] key. The
transceiver returns to the channel it was on prior to a weather channel.
10.7.1 NOAA Weather Alert
In the event of extreme weather disturbances, such as storms and hurricanes,
the NOAA (National Oceanic and Atmospheric Administration) sends a weather
alert accompanied by a 1050 Hz tone and subsequent weather report on one
of the NOAA weather channels. When the Weather Alert feature is enabled
(see section “
13.6 WEATHER ALERT ”), the transceiver is capable of receiv-
ing this alert if the following is performed:
1. Program NOAA weather channels into the transceiver’s memory for scan-
ning. Follow the same procedure as for regular channels under section
“
10.9.3 Memory Scanning
(
M-SCAN
).”
2. Press the [ SCAN
] soft key once to start memory scanning.
3. The programmed NOAA weather channels will be scanned along with the
regular-programmed channels. However, scanning will not stop on a nor-
mal weather broadcast unless a NOAA alert is received.
4. When an alert is received on a NOAA weather channel, scanning will stop and
the transceiver will emit a loud beep to alert the user of a NOAA broadcast.
5. Press the [ CLR
(
WX
)] key to stop the alert and receive the weather report.