4
Included Accessories and replacement part numbers
•
SAD-17
USB Wall Charger (100-240 VAC)
• Charging Cable (Type USB “A” plug to Type USB micro “B” plug)
•
CLIP-22
Belt Clip
•
SCH-11
Belt Clip Hanger & Screws (U40412220 x 2 pcs)
• Hand Strap
Optional Accessories
•
SCU-30
RAM4W Wireless Access Point with 5 feet (1.5 m) Cable
•
SDD-14
USB DC Charger with Cigarette Lighter Plug
Belt Clip Installation / Removal
1. To install, align the Belt Clip
CLIP-22
to the groove of the
rear panel, then press the Belt Clip downward until it locks
in place with a “Click”.
2. To remove, pull the
CLIP-22
tab away from the rear panel
to unlock the
CLIP-22
, then slide the
CLIP-22
upward to
remove it.
Battery Charging
If the battery has never been used, or its
charge is depleted, charge the
RAM4W
ac-
cording to the following procedures:
1. Turn the
RAM4W
OFF.
2. Slide the USB jack cover button down to
open the cover.
3. Referring to the figure at the right, connect
the supplied Charge Cable to the USB
jack.
4. If the connection is correct, the
RAM4W
’s LCD display will show the bat-
tery-charging icon.
5. A fully discharged
RAM4W
will be charged completely in approximately 4 hours.
When charging is completed, the battery charging icon will disappear.
CAUTION
Waterproof and floating features of the
RAM4W
are assured only when the USB jack cover is
locked completely.
The
SAD-17
or
SDD-14
is NOT designed to be waterproof. Charge the radio in a dry location.
Built-in Lithium-ion Battery
Capacity
1800 mAh
Nominal Voltage
3.7 V
Temperature Range
Minimum
Maximum
°C
°F
°C
°F
Charge
5
41
35
95
Discharge
–20
–4
60
140
Storage
–10
14
35
95
