Standart Horizon QUANTUM AIS GX6000, Руководство пользователя, Страница: 24 / 32

Page 22 GX6000
7.5.5 Connection to External GPS or Chart Plotter
4800 Baud Connections
GPS Receiver Radio Wires
Gray: NMEA OUT (+)
Brown: NMEA OUT (−)
Yellow: NMEA-HS OUT (+)
White: NMEA-HS OUT (−)
Blue: NMEA IN (+)
Green: NMEA IN (−)
Plotter Connection
NMEA OUT (−)
NMEA OUT (+)
NMEA IN (+)
NMEA-HS IN (+)
NMEA IN (−)
NMEA-HS IN (−)
Wire Color/Description Connection Examples
BLUE - NMEA GPS Input (+) NMEA (+) output of GPS*
1
GREEN - NMEA GPS Input (−) NMEA (−) output or common ground of GPS*
1
GRAY - NMEA DSC Output (+) NMEA (+) input of GPS*
1
BROWN - NMEA DSC Output (−) NMEA (−) input of GPS*
1
YELLOW - AIS Data Output (+) NMEA-HS (+) input of AIS receiver*
2
WHITE - AIS Data Output (−) NMEA-HS (−) input of AIS receiver*
2
*1: 4800 baud *2: 38400 baud
Note
: Some GPS chart plotters have a single wire for NMEA signal ground. In such a case connect
the NMEA input (−) to the GPS chart plotter’s single NMEA signal ground wire, and leave the NMEA
output (−) open. In case the assignment of power supply and ground of a GPS chart plotter to be
used is different from that of the radio, connect the signal ground wire of the GPS chart plotter to
the ground terminal (GND) on the rear panel of the radio.
38400 Baud Connections
GPS Receiver Radio Wires
Gray: NMEA OUT (+)
Brown: NMEA OUT (−)
Yellow: NMEA-HS OUT (+)
White: NMEA-HS OUT (−)
Blue: NMEA IN (+)
Green: NMEA IN (−)
Plotter Connection
NMEA OUT (−)
NMEA OUT (+)
NMEA IN (+)
No Connection
NMEA IN (−)
No Connection
Wire Color/Description Connection Examples
BLUE - NMEA GPS Input (+) NMEA (+) output of GPS*
1
GREEN - NMEA GPS Input (−) NMEA (−) output or common ground of GPS*
1
GRAY - NMEA DSC Output (+) NMEA (+) input of GPS*
1
BROWN - NMEA DSC Output (−) NMEA (−) input of GPS*
1
YELLOW - AIS Data Output (+)
No connection*
2
WHITE - AIS Data Output (−)
No connection* 2
*1: The GPS chart plotter ComPort must be setup to 38400 baud (HS) to send GPS coordinates to
the GX6000
(Blue and Green wires) and to receive DSC and AIS sentences from the
GX6000
(Gray and Brown wires).
*2: The
GX6000
always outputs NMEA 0183-HS VDM sentence at 38400.
Note
: Some GPS chart plotters have a single wire for NMEA signal ground. In such a case connect
the NMEA input (−) to the GPS chart plotter’s single NMEA signal ground wire, and leave the NMEA
output (−) open. In case the assignment of power supply and ground of a GPS chart plotter to be
used is different from that of the radio, connect the signal ground wire of the GPS chart plotter to
the ground terminal (GND) on the rear panel of the radio.