LED FLOOD FIXTURES
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS:
DIRECTLY FIX TO MOUNTING SURFACE
• Use expansion bolts to secure the fixture on mounting
surface (FIG. 1).
• Keep enough length wires to ensure adjusting angle
unhindered.
• Connect wires into wiring terminal; white wire to “Neu-
tral”
terminal, black wire to “Live” terminal, green wire to
“Ground”
terminal; and fix them by screws.
• Adjust the fixture to desired orientation, tighten the
screws.
Use cULus Listed Water-proof outlet box cove (FIG. 2).
INSTALLATION INSTRUCTIONS: KNUCKLE MOUNTING ( 80 W / 100 W )
• Adjust the fixture orientation by turning the bolt (FIG. 1).
• Please use a post of diameter 2.36” for mounting, and tighten with screws (FIG. 2).
• Please drill the holes on the square pole according to the size above (FIG. 3).
• Adjust the fixture to desired orientation, tighten the screws (FIG. 3)
.
INSTALLATION INSTRUCTIONS: KNUCKLE MOUNTING (10 W / 30 W / 50 W )
• Adjust the two screws turn the fixture left and right, up and down (FIG. 1).
• Secure service wire or conduit to the wiring compartment cover with 1/2” connector ( not provided ). ). Connect
white fixture wire to white supply wire, black fixture wire to black supply wire. Service ground should be attached to
green ground screw provided. Ground must be properly attached to avoid the risk of electrical shock. Use wire nuts,
crimp-on lugs, or other approved devices to connect all wires. Make sure connections are secure and that no loose wire
strands are sticking out of connectors. Secure wiring compartment cover to fixture, with black and white connections
inside the wiring compartment. Use UL and CUL Listed flexible steel waterproof conduit in trade size 1/2 and cULus
water-proof outlet box cove.(FIG. 2).
1
2
1
2
3
G(GREEN)
L(BLACK)
N(WHITE)
WALL
1
2
