Standard Horizon PHANTOM Series PS2000, Руководство пользователя

Страница: 32 / 84

Phantom PS2000 Page 32
4. To DELETE a channel from the transceiver’s memory, select
the channel then press and hold the [ SCAN
] key on the
RAM+
mic ., or press the [ F
] key, followed by the [
2
(
MEM
)] key on the
VH-310 Handset . “ MEM ” will disappear in the LCD.
5. To start scanning, press the [ SCAN
] key momentarily on the
RAM+ mic ., or press the [ F
] key, followed by the [
3
(
SCAN
)] key
on the VH-310 Handset . “
M-SCAN
” appears on the LCD. Scan-
ning will proceed from the lowest to the highest programmed
channel number and will stop on a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the [
16/9
], [
WX
], or
PTT key.
10.12.3 Priority Scanning
(
P-SCAN
)
In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to the desired channel from the Channel 16 by the Radio
Setup Mode, refer to section “
12.7 PRIORITY CHANNEL SET .”
1. Set the squelch level to the “squelch threshold” (the background noise is
turns off).
2. Select a desired channel to be scanned using the [
] or [ ] key, then
press and hold the [ SCAN
] key on the
RAM+ mic ., or press the [ F
] key,
followed by the [ 2
(
MEM
)] key on the
VH-310 Handset . “ MEM ” will appear
on the LCD which indicates the channel has been programmed into the
transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the [ SCAN
] key on the
RAM+ mic ., or press the [ F
]
key, followed by the [ 2
(
MEM
)] key on the
VH-310 Handset . “ MEM ” will
disappear in the LCD.
5. To start priority scanning, press the [ SCAN
] key momantarily on the
RAM+
mic ., or press the [ F
] key, followed by the [
3
(
SCAN
)] key on
the VH-310 Handset (“ P-SCAN ” appears on the LCD). Scan-
ning will proceed between the memorized channels and the
priority channel. CH 16 the priority channel will be scanned
after each programmed channel.
6. To stop scanning, press the [ 16/9
], [
WX
], or
PTT key.
You may change the scan resume time by the Radio Setup Mode, refer to
section “
12.9 SCAN RESUME TIME .”
MEM CH. CH. 16 MEM CH. CH. 16
MEM CH. CH. 16