Standard Horizon PHANTOM PS1000, Руководство пользователя

Страница: 36 / 68

Phantom PS1000 Page 36
11.6 INDIVIDUAL CALL
This feature allows the PS1000 to contact another vessel with a DSC VHF
radio and automatically switch the receiving radio to a desired communications
channel. This feature is similar to calling a vessel on CH16 and requesting to
go to another channel (switching to the channel is private between the two
stations).
11.6.1 Setting up the Individual / Position Call Directory
The Phantom PS1000 has a DSC directory that allows you to store a vessel or
person’s name and the MMSI number associated with vessels you wish to
transmit Individual calls, Position Requests and Position Send transmissions.
To transmit an Individual call you must program this directory with information
of the persons you wish to call, similar to a cellular phones telephone directory.
1. Press and hold down the [ CALL
(
SET
)
MENU
] key
until “ RADIO SETUP ” menu appears.
2. Press the [
] key to select “
DSC SETUP ” menu,
then press the [ CALL
(
SET
)
MENU
] key.
3. Press the [
] key to select “
INDIVIDUAL DIR
” menu,
then press the [ CALL
(
SET
)
MENU
] key.
4. Press the [
] or [ ] key to select “
Add .”
5. Press the [ CALL
(
SET
)
MENU
] key to enabling this
item.
6. Press the [
] or [ ] key to select the first letter of
the name of the vessel or person you want to refer-
ence in the directory.
7. Press the [ CALL
(
SET
)
MENU
] key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete. The name can consist of
up to eleven characters, if you do not use all eleven charac-
ters press the [
CALL
(
SET
)
MENU
] key to move to the next
space. This method can also be used to enter a blank space
in the name. To clear the previous letter, press the [
H/L
] key.
9. After the eleventh letter or space has been entered, press
and hold the [ CALL
(
SET
)
MENU
] key to advance to the MMSI
(Maritime Mobile Service Identity Number) number entry.
10. Press the [
] or [ ] key to select the first digit of the MMSI
number, then press the [ CALL
(
SET
)
MENU
] key to move to
the next digit. If a mistake was made entering in the num-
ber, pressing the [
H/L
] key to delete the wrong digit.