Installation
2021P-AS
Printed in Japan
Figure 2
(Wall Mount)
5.2
∅
The position of the bracket
may be reversed
Figure 1
(Desktop Mount)
5.2
∅
MLS-410PA
External Speaker with 10 Watt Amplifier
MLS-410LH
Loud Hailer Intercom Speaker
MLS-410SP
External Speaker
Flush Mount Installation
Use the template to mark the location, then make the round
hole.
NOTE
Confirm the space behind the dash or panel is deep
enough to accommodate the speaker:
MLS-410PA
: at least 4.9 inch (125mm) deep
MLS-410LH
and
MLS-410SP
: at least 2.8 inch (70mm)
deep
Figure 5
①
Turn 10 turns
②
Turn the 4 wing nuts
to adjust the tension
Figure 3
Wing Nut
M4 x 50 Screw
Wall thi approx. 0.4 inch (10mm)
Washer
Prepare the four supplied screws
Figure 4
Remove
Remove
Mounting Bracket Installation
Safety Precautions (Be Sure to Read)
Be sure to read the safety precautions in the Operating
Manual of the compatible transceiver to use this product
safely.
YAESU MUSEN CO., LTD.
Tennozu Parkside Building
2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan
YAESU USA
6125 Phyllis Drive, Cypress, CA 90630, U.S.A.
YAESU UK
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
Specifications
z
MLS-410PA
Supply Voltage
:
13.8VDC ±15%
Current Drain
:
1.5A @13.8VDC, VOL Knob MAX,
Audio Input Level: 700mVrms
Audio Input Level
:
700mVrms (Nominal)
1Vrms (Maximum)
Input Impedance
:
1.8kΩ (Approx.)
Speaker Impedance
:
8Ω
Audio Output
:
8W @13.8VDC, 10% THD
Audio Input Level: 700mVrms
Maximum Audio Output
:
10W @13.8VDC,
Audio Input Level: 700mVrms
Operating Temperature
:
–4°F to +140°F (–20°C to +60°C)
Connection Cable Length
:
6.5 feet (2 m)
z
MLS-410LH/SP
Speaker Impedance
:
4Ω
Maximum Audio Input
: 10W
Connection Cable Length
:
6.5 feet (2 m)
