GX2000/GX2100
Page 2
0
9 CONTROLS AND INDICATORS
NOTE
This section defines each control of the transceiver. See illustration at
the next page for location of controls. For detailed operating instructions
refer to chapter 10 of this manual.
9.1
CONTROLS AND CONNECTIONS
CH
Knob
Rotary knob used to select channels and to choose menu items (such as
the DSC menu, Radio Setup and DSC Setup menu). The [
UP
(
S
)] /
[
DOWN
(
T
)] keys on the microphone can also be used to select channels
and menu items.
S
ECONDARY
USE
y
Press this knob to enter a selection the “SETUP MENU” or “DSC MENU”.
y
While holding down the [
SCAN
] key and turning this knob, you can con-
firm memory channels for scanning.
y
Adjust the PA output level while in PA/FOG mode.
PWR/VOL
Knob
(Power Switch / Volume Control)
Turns the transceiver on and off as well as adjusts the audio volume.
To turn the transceiver on, press and hold this knob until the LCD turns on.
When the power is turned on, the transceiver is set to the last selected
channel. Clockwise rotation of this knob increases the audio volume level.
To turn the transceiver off, press and hold this knob until the LCD turns off.
S
ECONDARY
USE
When in PA or Fog mode, controls the listen back volume.
SQL
Knob
(Squelch Control)
Adjusting this control clockwise, sets the point at which random noise on
the channel does not activate the audio circuits but a received signal does.
This point is called the squelch threshold. Further adjustment of the squelch
control will degrade reception of wanted transmissions.
