page 29
Owner’s Manual
GX1270S
6. Press the
UP
or
DOWN
key to select the name.
7. Press the
CALL/SET
key to display the logged
call.
8. Press the
CALL/SET
key to resend the INDIVIDUAL CALL.
9. To exit from Individual Call Waiting, select EXIT and press the
CALL/SET
key.
10. Press the
UP
or
DOWN
key to select another logged call or to select
EXIT.
11. Press the
CALL/SET
key to access next logged call or EXIT.
6.9
POSITION REQUEST
The position request mode may be used to show the position of another
vessel that has a DSC radio with this feature. The other vessel must have
an operating GPS receiver connected to its DSC transceiver and must not
have its transceiver set to deny position requests. (Refer the section 7.5 to
enter information into the individual derctory)
1. Select a traffic channel, then press the
CALL/
SET
key. Then the DSC CALLING menu will
appear in the display.
2. Press the
UP
or
DOWN
key to select the POS
REQUEST.
3. Press
CALL/SET
key to appear the Position
request directory. This directory uses the
INDIVIDUAL Directory information.
4. Press the
UP
or
DOWN
key to select a name.
5. Press the
CALL/SET
key to transmit the
position request DSC call.
>NAME1
NAME2
NAME3
NAME4
A
>TOM
MIKE
BOB
DICK
A
TELEPHONE
STANDBY
CALL WAIT
>POS REQUEST
A
TOM
MIKE
>BOB
DICK
A
TX HI USA
BOB
>INDIVIDUAL
GROUP
ALL SHIPS
TELEPHONE
A
JUN15 8:45P
ID987654321
A
EXIT
>SEND
