GX1260S
Owner’s Manual
page 15
5.10 POSITION INDICATION
The transceiver has the ability to display the time and date as well as the
vessel’s position (LAT/LON), if connected to a GPS receiver.
1. Press the POS key to display position
information.
2. To hide the position information, press the POS
key.
NOTE
• The TIME OFFSET should be set to local time in the DSC/RADIO
setup mode when the radio is connected the GPS navigation
receiver. To adjust TIME OFFSET to your local time, refer to section
7.6 TIME OFFSET.
5.11 RESETTING THE TRANSCEIVER’S MICROPROCESSOR
Resetting the microprocessor restores the initial, factory supplied
conditions in the transceiver. These are called the default conditions.
To reset the microprocessor, first turn the transceiver off. Then while
pressing the WX and SCAN keys, turn the transceiver on. The default
conditions are:
• No channels in SCAN memory.
• Channel 16 will be selected when the transceiver is turned on.
• WX channel 01 will be recalled when the WX key is pressed.
NOTE
Resetting the microprocessor will not erase DSC MMSID and
Directory Call Waiting information.
JUN15 08:45P
35.55. N
138.28. W
A
