Standard Horizon HX870 Скачать руководство пользователя страница 14

Страница: 14 / 140

Page 14

HX870

objects such as paper clips, keys, tools, etc. When the battery pack is installed

on the transceiver, the terminals that transfer current to the transceiver are not

exposed. The terminals that are exposed on the battery pack when it is mounted

on the transceiver are charging terminals only and do not constitute a hazard.

DO NOT INCINERATE

: Do not dispose of any battery in a fire or incinerator. The

heat of fire may cause battery cells to explode and/or release dangerous gases.

Battery Maintenance

For safe and proper battery use, please observe the following:



Battery packs should be charged only in non-hazardous environments.



Use only STANDARD HORIZON-approved batteries.



Use only a STANDARD HORIZON-approved charger. The use of any

other charger may cause permanent damage to the battery.



Follow charging instructions provided with the chargers.



Keep the battery contacts clean.

Battery Storage

Store the batteries in a cool place to maximize storage life. Since batteries are

subject to self-discharge, avoid high storage temperatures that cause large

self-discharge rates. After extended storage, a full recharge is recommended.

Battery Recycling

DO NOT PLACE USED BATTERIES IN YOUR REGULAR TRASH!

LI-ION BATTERIES MUST BE COLLECTED, RECYCLED OR DISPOSED

OF IN AN ENVIRONMENTALLY SOUND MANNER.

The incineration, land filling or mixing of Li-ion batteries with

the municipal solid waste stream is PROHIBITED BY LAW

in most areas.
Return batteries to an approved Li-ion battery recycler. This

may be where you purchased the battery.

Contact your local waste management officials for other

information regarding the environmentally sound collection,

recycling and disposal of Li-ion batteries.

Содержание HX870













































































































































Результаты поиска

Содержание HX870

Отзывы:

Похожие инструкции для HX870

Бренды по названию

Популярные бренды

Standard Horizon HX870, Руководство пользователя

Результаты поиска

Содержание HX870

Отзывы:

Похожие инструкции для HX870

Бренды по названию

Популярные бренды