Standard Horizon HX600S, Руководство по обслуживанию

Страница: 11 / 30

11
Mid Power Adjustment
Set the transceiver to CH 12, and select Mid power
output.
Press and hold in the PTT , SQL , [
] and [ ] key while
turning the transceiver on to enter the Alignment
Mode.
Press the [
] or [ ] key to select the display to
“
MPOW
.“ The transceiver now is in the Mid power
output Alignment Mode.
Press the [ MEM
] key to enable adjustment of the Trans-
mitter Mid Power Output.
Press the PTT key to cause the transceiver to trans-
mit; if necessary, press the [
] or [ ] key to adjust
the output power to 2.5 W (±0.1 W).
Press the [ MEM
] key to exit the Transmitter Mid Power
Output Alignment Mode.
High Power Adjustment
Set the transceiver to CH 12, and select High power
output.
Press and hold in the PTT , SQL , [
] and [ ] key while
turning the transceiver on to enter the Alignment
Mode.
Press the [
] or [ ] key to select the display to
“
HPOW
.“ The transceiver now is in the High power
output Alignment Mode.
Press the [ MEM
] key to enable adjustment of the Trans-
mitter High Power Output.
Press the PTT key to cause the transceiver to trans-
mit; if necessary, press the [
] or [ ] key to adjust
the output power to 5.0 W (±0.1 W).
Press the [ MEM
] key to exit the Transmitter High
Power Output Alignment Mode.
Transmitter Modulation
Set the transceiver to CH 12, and select High power
output.
Press and hold in the PTT , SQL , [
] and [ ] key while
turning the transceiver on to enter the Alignment
Mode.
Press the [
] or [ ] key to select the display to “
MOD
.“
The transceiver now is in the Transmitter Modulation
Alignment Mode.
Set the AF generator output to 50 mV rms @ 1 kHz.
Press the [ MEM
] key to enable adjustment of the Trans-
mitter Modulation.
Press the PTT key to cause the transceiver to trans-
mit; if necessary, press the [
] or [ ] key to adjust
the deviation to 4.2 kHz (±0.1 kHz).
Press the [ MEM
] key to exit the Transmitter Modula-
tion Alignment Mode.
ATIS FSK Modulation
Set the transceiver to CH 12, and select Low power
output.
Press and hold in the PTT , SQL , [
] and [ ] key while
turning the transceiver on to enter the Alignment
Mode.
Press the [
] or [ ] key to select the display to
“
AT FSK
.“ The transceiver now is in the ATIS FSK
Modulation Alignment Mode.
Press the [ MEM
] key twice, then press the [ ] or [ ]
key to select the display to “
FSK 2
.“
Press the PTT key to cause the transceiver to trans-
mit; confirm that the ATIS FSK Modulation is 2.1 kHz
± 0.3kHz.
If necessary, press the [
] or [ ] key to select the dis-
play to “
AT FSK
“, then press the [ MEM
] key.
Press the [
] or [ ] key to adjust the ATIS FSK Modu-
lation is 2.1 kHz ± 0.3kHz.
Press the [ MEM
] key to exit the ATIS FSK Modulation
Alignment Mode.
DISTRESS FSK Modulation
Set the transceiver to CH 12, and select Low power
output.
Press and hold in the PTT , SQL , [
] and [ ] key while
turning the transceiver on to enter the Alignment
Mode.
Press the [
] or [ ] key to select the display to
“ DS FSK .“ The transceiver now is in the DISTRESS
FSK Modulation Alignment Mode.
Press the [ MEM
] key twice, then press the [ ] or [ ]
key to select the display to “
FSK 2
.“
Press the PTT key to cause the transceiver to trans-
mit; confirm that the DISTRESS FSK Modulation is
3.5 kHz ± 0.3kHz.
If necessary, press the [
] or [ ] key to select the dis-
play to “
DS FSK
“, then press the [ MEM
] key.
Press the [
] or [ ] key to adjust the DISTRESS FSK
Modulation is 3.5 kHz ± 0.3kHz.
Press the [ MEM
] key to exit the DISTRESS FSK Modu-
lation Alignment Mode.
Alignment