HX500S
Page 11
4.1.4 USING THE CD-35 CHARGER CRADLE
1. Turn the transceiver off.
2. Insert the DC plug from the
NC-90
into the DC jack on the
CD-35
side
panel, then plug the
NC-90
into the AC line outlet.
3. Insert the
HX500S
(with the battery pack) into the
CD-35
; the antenna
should be at the left side when viewing the charger from the front.
4. If the
HX500S
is inserted correctly, the Red indicator on the
CD-35
will
glow. A fully-discharged pack will be charged completely in approximately
8 hours.
Important Note:
Do not leave the charger connected to the transceiver for continuous
periods in excess of 24 hours. Long term overcharging can degrade the
Lithium-Ion battery pack and significantly shorten its useful life.
5. When charging is completed, disconnect the pack from the
CD-35
, and
unplug the
NC-90
from the AC line outlet.
4.1.5 MOUNTING THE CD-35 ON THE VESSEL
The
CD-35
is designed to be surface on a vessel which can be connected to
the charger.
If mounting on a vessel, the
CD-35
must be mounted in a location on the
vessel that is directly shielded from rain or splashes of water. After the loca-
tion is found, mount the
CD-35
using the supplied mounting screws.
CD-35 Desktop Mount
