Standard Horizon HX471S, Руководство по обслуживанию

Страница: 14 / 66

14
Alignment
to 4.2 kHz (±0.2 kHz), then press the [ MENU
] key to
save the new setting.
Press the [ BAND
] key (Change the frequency display
to 162.025 from 155.000 MHz), then press the [ MENU
]
key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 4.2 kHz (±0.2 kHz), then press the [ MENU
] key to
save the new setting.
Transmitter Output (FRS Band)
Press the [
] key three times to select the display to
[ FRS POWER
**
] ([
**
] is “ 00 ” to “ FF ” Hex data). The
radio now is in the Alignment Mode of the Transmit-
ter Output of the FRS Band.
Press the [ MENU
] key to enable adjustment of this
Alignment Mode.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the output
power to 0.5 W (±0.05 W), then press the [ MENU
] key
to save the new setting.
Press the [ BAND
] key (Change the frequency display
to 467.712 from 462.562 MHz), then press the [ MENU
]
key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the output
power to 0.5 W (±0.05 W), then press the [ MENU
] key
to save the new setting.
Press the [
] key to select the display to [
FRS DEV
**
], then press the [ MENU
] key. The radio now is in
the Alignment Mode of the TX deviation of the FRS
Band.
Set the Audio generator output to 50 mV at 1 kHz.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 2.1 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [ BAND
] key (Change the frequency display
to 467.712 from 462.562 MHz), then press the [ MENU
]
key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 2.1 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Turn off the Audio generator output.
Press the [
] key to select the display to [
FRS 67.0
**
], then press the [ MENU
] key. The radio now is in
the Alignment Mode of the CTCSS deviation of the FRS
Band.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 0.5 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [
] key to select the display to [
FRS 100.0
**
], then press the [ MENU
] key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 0.5 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [
] key to select the display to [
FRS 250.3
**
], then press the [ MENU
] key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 0.5 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [ BAND
] key (Change the frequency display
to 467.712 from 462.562 MHz), then press the [ MENU
]
key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 0.5 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [
] key to select the display to [
FRS 100.0
**
], then press the [ MENU
] key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 0.5 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [
] key to select the display to [
FRS 67.0
**
], then press the [ MENU
] key.
Press the PTT key to transmit the transceiver, if neces-
sary, press the [
] or [ ] key to adjust the deviation
to 0.5 kHz (±0.1 kHz), then press the [ MENU
] key to
save the new setting.
Press the [ 16/9
] key to save the new setting and exit to the
normal operation.