GX1600
Page 56
9.8.2 Position Request Ringer Setup
The
GX1600
has the capability to turn off the Position Request ringer.
1. Press and hold down the
key until “
Setup
Menu
” appears.
2. Press the
/
key to select “
DSC
SETUP
” menu.
3. Press the
soft key, then select “
DSC
BEEP
” with the
/
key.
4. Press the
soft key, then select “
POS
Request
” with the
/
key.
5. Press the
soft key, then select “
Off
”
with the
/
key.
6. Press the
soft key to store the selected set-
ting.
7. Press the
soft key several times to return to radio operation.
To re-enable the ringer tone, repeat the above procedure, pressing the
/
key to select “
On
” in step “5” above.
9.8.3 Transmitting a Position Request to Another Vessel
9.8.3.1 Position Request using the Individual Directory
1. Press the
key. The “
DSC Menu
” will ap-
pear.
2. Press the
/
key to select “
POS RE-
QUEST
”.
3. Press the
/
key to select a name
that was stored in the Individual DSC direc-
tory, then press the
soft key.
4. Press the
soft key to transmit the Po-
sition Request DSC call.
5. When the
GX1600
receives the position from the
polled vessel it is shown on the radio display
and also transferred to a GPS Chart plotter
with NMEA DSC and DSE sentences.
6. Press the
soft key to return to radio
operation.
NOTE
If the
GX1600
does not receive a position data from the polled vessel,
the display will show “NO POSITION DATA.”
Содержание Explorer GX1600
Страница 21: ...Page 21 GX1600 MEMO ...
Страница 89: ...Page 89 GX1600 MEMO ...
Страница 108: ...GX1600 Page 108 19 5 DIMENSIONS ...
Страница 109: ...Page 109 GX1600 ...