Standard Horizon Eclipse GX1300 Скачать руководство пользователя страница 27

Страница: 27 / 120

Page 27

GX1300

8.6 NOAA WEATHER CHANNELS

1. To receive a NOAA weather channel, press

one of the soft keys, then press the

soft key

from any channel. The transceiver will go to

the last selected weather channel and the “

”

icon appears on the display.

2. Press the Up / Down keys to select a different NOAA weather channel.

3. To exit from the NOAA weather channels, press one of the soft keys,

then press the

soft key. The transceiver returns to the channel it was

on prior to a weather channel and the “

” icon disappears from the

display.

8.6.1 NOAA Weather Alert

In the event of extreme weather disturbances, such as storms and hurri-

canes, the NOAA (National Oceanic and Atmospheric Administration) sends

a weather alert accompanied by a 1050 Hz tone and subsequent weather

report on one of the NOAA weather channels.
The

GX1300

can receive weather alerts when on a weather channel and on

the last selected weather channel during scanning modes or while on anoth-

er channel.

When an alert is received on a NOAA weather

channel, scanning will stop and the transceiver

will emit a loud beep to alert the user of a NOAA

broadcast. Press any key to stop the alert and

receive the weather report.

To disable the weather alert function, refer to section “

10.2.2 Weather

Alert

”.

8.6.2 NOAA Weather Alert Testing

NOAA tests the alert system ever Wednesday between 11AM and 1PM.

To test the

GX1300

’s NOAA weather feature, on Wednesday between 11AM

and 1PM, setup as in section “

8.6.1 NOAA Weather Alert

” and confirm the

alert is heard.

Содержание Eclipse GX1300

























































































































Результаты поиска

Содержание Eclipse GX1300

Отзывы:

Похожие инструкции для Eclipse GX1300

Бренды по названию

Популярные бренды

Standard Horizon Eclipse GX1300, Руководство пользователя

Результаты поиска

Содержание Eclipse GX1300

Отзывы:

Похожие инструкции для Eclipse GX1300

Бренды по названию

Популярные бренды