OPERATIONAL INSTRUCTIONS
Hook
2
U Bracket
2
Handlebar
2
Bolt, Button Head (M8 x 1.25 x 24mm)
2
Bolt, Button Head (M6 x 1 x 15mm) 4
Washer (M8)
4
Plastic Washer (M8)
2
Nylock Nut (M8 x 1.25)
2
Pull Pin
2
Foam Grip
2
Owner’s Manual
1
1
2
3
4
5
6
7
8
9
10
11
Part No. and Description
Qty
ø1” Bar
Rotating
Pull-Up Handle
LIMITED WARRANTY
Products shipped to the manufacturer must be in the original shipping carton with freight prepaid. All expenses for
repairing or replacing the product, including the cost of shipping it back to the original purchaser, will be covered by the
manufacturer. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If the product should, for any reason, become defective within 90 days of purchase, the manufacturer will replace
the product once it is returned to the manufacturer. This warranty does not apply to any damage caused by accident,
return transit, alteration, abuse, or misuse. There are no other warranties other than those expressly set forth herein.
This product is warranted to be free from defects in material and workmanship and to be in perfect working order at
the time of purchase. This warranty applies to personal, family or household use. This warranty does not apply to
use in athletic clubs, health clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities.
50-1690
POWER TOWER
50-1700
POWER TOWER
50-0050
DOORWAY
TRAINER PLUS
To use the
Rotating Pull-Up Handle:
Remove the
PULL PIN(9)
from the
Rotating Pull-Up Handle.
Hook the
Rotating Pull-Up
Handle
onto a strong one inch horizontal bar and secure with the
PULL PIN(9).
The
PULL PIN(9)
must be inserted through the two
walls of the
Rotating Pull-Up Handle.
Repeat to install the other
Rotating Pull-Up Handle.
The illustrations below show the
Rotating Pull-Up Handles
installed for use on the
Stamina® 1690 Power Tower,
the
Stamina® 1700 Power Tower,
and the
Stamina® Doorway
Trainer Plus.
