manualshive.com logo in svg

Stamina Fusion 7250, Руководство пользователя, Страница: 9 / 27

Поделиться
Скачать
Stamina Fusion 7250 Скачать руководство пользователя страница 9

9

ASSEMBLY INSTRUCTIONS

To attach the 

HANDRAIL(9),

 position the 

HANDRAIL(9)

 under the 

SEAT CARRIAGE(7)

 as shown in the

above illustration and secure with 

BUTTON HEAD BOLTS(M8x1.25x45mm)(71), ARC WASHERS(M8)

(98),

 and 

LOCK WASHERS(M8)(100).

STEP 8

Refer to the inset drawing. Plug the 

PULSE SENSOR WIRE(55)

 into the 

SOCKET

 of the 

PULSE EXTENSION

WIRE(43) 

located on the 

SEAT RAIL(45).

STEP 7

NOTE:

The 

PULSE SENSOR WIRES(55)

 go through the tube of the 

HANDRAIL(9).

 Be careful not to

damage the wires with the 

BUTTON HEAD BOLTS(M8x1.25x45mm)(71)

 when attaching the

HANDRAIL(9)

 to the 

SEAT CARRIAGE(7).

Socket of Pulse
Extension Wire(43)

STEP 6

Attach the 

SEAT FRAME(114)

 to the 

SEAT CARRIAGE(7)

 with 

BUTTON HEAD BOLTS(M10x1.5x200mm)

(76), WASHERS(M10)(99), LOCK WASHERS(M10)(101),

 and 

ACORN NUTS(M10x1.5)(97).

NOTE:

Use this set of attachment
holes for assembly.

The four attachment holes on each side of the 

SEAT FRAME(114)

 allow the 

SEAT FRAME(114)

 to

be attached in two different positions: one to position you closer to the 

HANDLEBAR(4)

 and one

further away. At this point of assembly, use the holes at the back so the Seat Assembly is closer to
the 

HANDLEBAR(4).

 After all assembly steps, refer to page 14 for the details of seat adjustment.

Содержание Fusion 7250




























Отзывы:

Нет отзывов