Stamina CoreTraining Inversion System, Руководство пользователя

Страница: 6 / 22

ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520 or e-mail us at :
parts@staminaproducts.com
6
STEP 1:
There is a
"L"
decal on the
LEFT FRONT FRAME(1),
and a
"R"
decal on the
RIGHT FRONT
FRAME(2).
Insert the
LEFT
and
RIGHT FRONT FRAMES(1, 2)
into the
FRONT BASE FRAME(4),
the one with
WARNING LABEL(70),
and secure with
BUTTON HEAD BOLTS(M8 x 55mm)(60),
ARC WASHERS(M8)(69), WASHERS(M8)(67),
and
NYLOCK NUTS(M8)(64).
Insert the
REAR
FRAMES(3)
into the
REAR BASE FRAME(5)
and secure with
BUTTON HEAD BOLTS(M8 x 55mm)
(60), ARC WASHERS(M8)(69), WASHERS(M8)(67),
and
NYLOCK NUTS(M8)(64).
Do not tighten
the bolts until
STEP 3.
STEP 2:
Slide the upper ends of the
REAR FRAMES(3)
into the Brackets on the
FRONT FRAMES
(1, 2)
and secure with
BUTTON HEAD BOLTS(M8 x 15mm)(58),
and
WASHERS(M8)(67).
Do not
tighten the bolts until
STEP 3.
STEP 3
NOTE:
Attach the
CROSSING FRAME(6)
onto the
REAR FRAMES(3)
with
BUTTON HEAD BOLTS
(M8 x 15mm)(58)
and
WASHERS(M8)(67).
Tighten all of the bolts.
Attach the
CROSSING FRAME(6)
so that the long flat surface of the center bracket is on top as
shown in the illustration.
L
R