ASSEMBLY INSTRUCTIONS
8
NOTE:
The securing
SCREWS(M6x1x35mm)(36)
for the
PULLEY SET(22)
on each side may need
to be loosened to allow the
REAR COVER(4)
to fit securely over the frame. Refer to the inset
illustration. Before removing the paper covering from the foam tape inside the
REAR COVER(4)
,
place the
REAR COVER(4)
onto the
REAR FRAME(2)
and make sure that the
SCREWS
(M6x1x35mm)
are correctly tightened to allow the
REAR COVER(4)
to fit securely over the
frame. The
PULLEY SETS(22)
should swivel freely.
STEP 4
Remove the paper covering from the foam tape inside the
FRONT COVER(3)
and
REAR COVER(4).
Place the
FRONT COVER(3)
over the end of the
FRONT FRAME(1).
Place the
REAR COVER(4)
over
the end of the
REAR FRAME(2).
Press the covers securely in place.
STEP 5
Insert the
FOAM PAD ASSEMBLIES(17)
into the holes located on the
CARRIAGE(7).
Содержание aeropilates premier 299
Страница 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Страница 18: ...NOTES 18...
