The safety and integrity designed into the
AVARI® Recumbent Bike
can only be maintained when the
AVARI® Recumbent Bike
is regularly examined for damage and wear. Special attention should be
given to the following:
1. Adjust the
TENSION KNOB(8)
and verify that the resistance changes.
2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that
the left pedal has left hand threads and is tightened by turning counterclockwise.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the
WARNING LABEL(75)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
WARNING LABEL(75)
if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the
AVARI® Recumbent Bike
removed from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the
AVARI®
Recumbent Bike.
8. Keep your
AVARI® Recumbent Bike
clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
15
1. To store the
AVARI® Recumbent Bike,
simply keep it in a clean dry place.
2. The
AVARI® Recumbent Bike
is approximately 49.6 inches long x 24 inches wide x 39.4 inches tall.
These dimensions will vary. Please measure your
AVARI® Recumbent Bike
if exact dimensions are
needed.
3. Lift the
AVARI® Recumbent Bike
by the
HANDLEBAR(10)
and
REAR STABILIZER(4)
to move. Two
people are required to move the
AVARI® Recumbent Bike.
4. To avoid damage to the electronics, remove the batteries before storing the
AVARI® Recumbent
Bike
for one year or more.
Содержание A150-210
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK ...
Страница 22: ...NOTES 22 ...