10
ROPE LENGTH ADJUSTMENT
The
ROPES(41)
feed through the
PULLEY SETS(38)
then thread through the loops on the underside of
both outer edges of the
CARRIAGE(25).
PLASTIC SNAP HOOKS(42)
on the end of each rope are used to
adjust the
ROPE(41)
length. If more length is needed, attach the
PLASTIC SNAP HOOKS(42)
to loop D. To
shorten, bring the
ROPES(41)
around the last loop D and secure to loops A, B, or C with the
PLASTIC
SNAP HOOKS(42).
Wrap
ROPES(41)
through the loops and attach where needed to shorten
ROPES(41)
even more.
B
D
C
A
OPERATIONAL INSTRUCTION
LOAD ADJUSTMENT
The resistance of the
CARRIAGE(25)
can be adjusted by securing the
TENSION CORDS(29)
in the slots
on the
CORD HOLDER(21).
You can achieve various levels of resistance by securing different numbers of
the
TENSION CORDS(29)
in the slots.
NOTE:
Over time your
TENSION CORDS(29)
will relax. To increase resistance in the
TENSION CORDS(29),
stretch and re-tie the tension cords in a more taut position.
Содержание 55-5556B
Страница 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK...
