Stamina 55-1532A, Руководство пользователя

Страница: 10 / 18

OPERATIONAL INSTRUCTIONS
10
GENERAL PRECAUTIONS
Use the lowe st holes in the PIVOT ARMS(5) until you be come familiar with the Gravity Inversion
Therapy Table.
Do not use the Gravity Inversion Therapy Table alone. Always have a helper available in case assistance
is needed in recovering from the decline position.
Make sure that the HEEL HOLDERS(12) and FOAM PADS(31) are holding your feet securely.
Make sure that the HEIGHT ADJUSTMENT BEAM(6) is properly set for your height.
Make sure that the
HEIGHT ADJUSTMENT BEAM(6)
is held se curely by both the
LARGE SPRING
PIN(18) and the LOCKING KNOB(19).
Make sure that there is enough room for the bed to rotate completely.
1.
2.
3.
4.
5.
6.
THE HANDLEBARS
For added convenience, and safety, a set of HANDLEBARS has been a dded to the Gravity Inversion
Therapy Table. These HANDLEBARS are located at the top of the REAR FRAME(2). The HANDLEBARS
are to help you return to the upright position from a ny degree of inversion. If you wish to return to the upright
position, and the bed is moving too slowly, or not moving at all, simply grab the HANDLEBARS and pull on
them until you return to the upright position.
HEIGHT ADJUSTMENT
The Gravity Inversion Therapy Table is a very sensitive balance device. It responds to very slight changes
in weight distribution. It is very important to make sure that the height adjustment is set properly. Use the
following procedure to set the height adjustment and balance the Gravity Inversion Therapy Table.
Adjust the NYLON STRAPS to re strict
movement to a pproximately 15 degree s
beyond the horizontal position. The
nylon straps should not allow the Gravity
Inversion Therapy Table to go into the full
inversion position while you are setting the
height adjustment.
Loosen the LOCKING KNOB(19) under the
MAIN FRAME(4).
Pull the LARGE SPRING PIN(18) and use
the SCALE DECAL(16) to set the HEIGHT
ADJUSTMENT BEAM(6).
Tighten the LOCKING KNOB(19).
Mount the machine.
Lock your ankles into the HEEL HOLDERS
(12) and FOAM PADS(31).
Lie back with your hands at your sides.
Slowly raise your hands to your chest.
If your feet are higher tha n your he ad,
dismount and try a taller setting. If you do
not rotate to a position close to level,
dismount and try a shorter setting.
1.
2.
3.
4.
5.
6.
7.
8.
9.
The Gravity Inversion Therapy Table should return to the upright position when your hands are
below your waist. If it does not, use a taller setting.
Verify that adequate head clearance is available between the user's hea d and the floor bef ore
using this inversion table. This is especially important for tall users.
NOTE:
1.
2.
Handlebars