manualshive.com logo in svg

STALEX C0632D, Руководство по эксплуатации и список запасных частей

Поделиться
Скачать
STALEX C0632D Скачать руководство пользователя страница 15

Operation Manual 

 13

7. Thread and Feed Selection 

7.1. Thread and feed selection 

All feed and threads are given on the feed thread tables, fitted on the front and inside 

of the gear box cover (35), by setting the four feed selector handles (31),(32),(33),(34). 

(A). Hand feed operation   
The movement of carriage is made by the longitudinal traverse handwheel (9), cross 

sliding  by  the  cross  traverse  handle(12),  and  compound  rest  by  the  compound  rest 
traverse  handle  (15),  the  carriage  is  anchored  by  turning  the  carriage  lock  screw  in 
clockwise direction. 

(B). Replacement of change gears 
Take  off  the  gear  box  cover(35)firstly,  and  then  loosen  clamping  shaft  and  the 

clamping screw of the swing frame to exchange the transmission shaft gear with another 
gear, it is necessary for suitable back lash to intermediate the gears in both cases. 

Change gear

’

s assemble style have 3 kind: F, G, H. F, G assemble style be used for 

feed and metric thread, imperial thread cutting. H assemble style be used for MP thread, 
DP thread cutting. F assemble style be used on machine for leave factory. 

For any special threads not covered by the thread table, our engineering department 

is available to specify the most convenient change gearing required. 

(C). Automatic feed operation and change 
When the feed axis selector (13) on the apron is pulled out and operated upward, we 

can obtain a longitudinal feed and cross feed can be obtained by pushing the selector in 
and  operating  it  downward.  (Make  sure  the  thread  cutting  engagement  lever  (16)  at 
disengaged position before operating the feed axis selector.) 

Feed direction can be changed by turning feed direction selector . It have 24 kinds of 

feed speeds each in longitudinal and cross feed can be obtained by means of the feed 
selector handles. 

 
 
 
 
 
 
 
 

Содержание C0632D



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды