OPERATION INSTRUCTIONS
Warning:
Before adjusting or checking the tool function, be sure to turn off the
power switch and remove the battery pack.
-
Always turn off the power switch
before installing or removing the
battery pack.
- When removing the battery pack,
press battery unlock button and pull
the battery pack out of the tool.
- When installing the battery pack,
align the tongue on the battery
pack with the groove on the cover
and push it into place. Insert it fully in
place until the battery pack is
locked and clicks. Otherwise it may
accidentally fall out of the tool,
causing injury to yourself or others.
- Do not use brute force when installing the battery pack. If the battery pack
is difcult to insert, it may be improperly inserted.
Warning:
When battery packs is not in use,keep it away from other metal
objects,like paper clips,coins,keys,nails,screws or other small metal
objects,that can make a connection from one terminal to another.Shorting
the battery terminals together may cause burns or a re.
1. Install or remove battery pack
2. Install drill bit
Note:
Adjust the positive reverse switch
to the central position to avoid sudden
start.
1. Hold the quick chuck and rotate in
anticlockwise direction,until the drill
bit can be inserted.
2. Hold the quick chuck and rotate in
clockwise direction,until the drill bit is
locked.
PL
EN
ORIGINAL INSTR
UCTION
21