16
Original INSTR
UCTION
PL
EN
use.Use of a cord suitable for outdoor use reduces the risk of electric shock.
6)
If poerating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
NOTE
The term "residual current device (RCD)"
may be replaced by the trem "ground
fault cirrcuit
interrupter (GFCI)"or"
earth leakage circuit breaker
(ELCB)"
3.
Personal safety
1)
Stay alert,watch what you are doing and use common sense when operating
a power tool.
Do not use a power tool while you are tired or under the inuence of
drugs,
alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
2)
Use safety equipment.
Always wear eye protection.
Safety equipment such as dust
mask,
non-skid safety shoes,
hard hat,
or hearing protection used for appropiate
conditions will reduce person-al injuries.
3)
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or energising power tools that
have the switch on invites accident.
4)
Remove any adjusting key or wrench before turning the power tool on.
A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
5) Do not overreach.
Keep proper footing and balance at all times.This enables better
control of the power tool in unexpected situations.
6)
Dress properly.
Do not wear loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving parts.
Loose clothes,
jewellery or long hair can be caught
in moving parts.
7)
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected properly used.
Use of these devices can
reduce dust related hazards.
4.
Power tool use and care
1)
Do not force the power tool.Use the correct power tool for your application.
The
correct power tool will do the job better and safer at the rate for which it was
designed.
2)
Do not use the power tool if the switch does not turn it on and off.
Any power tool that
cannot be controlled with the swich is dangerous and must be repaired.
3)
Disconnect the plug from the power source before making any adjustments,
changing accessories,
or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally
4)
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained use.
5)
Maintain power tools.Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation, if
damaged,
have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
6)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less liked to bind and are easier to control.
7)
Use the power tool,accessories and tool bits etc.,in accordance with
these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed. Use of the
Содержание AK18DA-BS
Страница 2: ...2 PL EN TŁUMACZENIE INSTRUKCJI ORYGINALNEJ ...
Страница 14: ...14 Original INSTRUCTION PL EN ...
