Stairville PAR64 CX-2 RGBAW, Руководство пользователя

Страница: 28 / 44

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘LINE’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘MA’ . Press [OK] . Now you can
select one of the 42 preprogrammed automatic shows. Use the arrow keys to select a value
between 1 and 42 (display shows ‘P-01’ … ‘P-42’ ).
The automatic show can only be activated on the unit, that operates as Master.
This setting is only relevant if the unit is not controlled via DMX. The device can work in stand-
alone mode or control connected devices of the same type, which must be configured as
‘Slave’. When the display shows the desired value, press [OK] to confirm the selection, and then
[M] to return to the parent menu. To return to the parent menu without any changes, press
[M] .
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘LINE’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘SL’ . Press [OK] . Now you can set
the number of the device through which it is addressed as Slave by the Master. Select a value
between 1 and 512 with the arrow keys (display shows ‘A001’ … ‘A512’ ).
This setting is only relevant if the unit works as slave controlled by a master, but not via DMX.
When the display shows the desired value, press [OK] to confirm the selection, and then [M] to
return to the parent menu. To return to the parent menu without any changes, press [M] .
Operating mode ‘Show/Master’
Operating mode ‘Slave’
Operating
LED PAR
28