Stairville PAR64 10MM UV, Руководство пользователя

Страница: 23 / 36

Press the [M] button. Press one of the arrow keys repeatedly until the display shows ‘LINE’ .
Press [OK] . Press one of the arrow keys repeatedly until the display shows ‘MA’ . Press [OK] . Now
you can select one of the 4 preprogrammed automatic shows. Use the arrow keys to select a
value between 1 and 4 (the display shows ‘P-01’ … ‘P-04’ ).
The automatic show can only be activated on the device that operates as ‘Master’.
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that have to be configured
as ‘Slaves’. When the display shows the desired value, press [OK] to confirm the selection. Then
press [M] to return to the higher menu level. To return to the higher menu level without
changes, press [M] .
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘LINE’ . Press [OK] .
Press one of the arrow keys repeatedly until the display shows ‘SL’ . Press [OK] . Now you can
assign a number to the device by which it is addressed as slave by the master. Use the arrow
keys to select a value between 1 and 512 (the display shows ‘A001’ … ‘A512’ ).
This setting is only relevant if the device is operated as slave by a master, but is not controlled
via DMX. When the display shows the desired value, press [OK] to confirm the selection. Then
press [M] to return to the higher menu level. To return to the higher menu level without
changes, press [M] .
Operating mode ‘Show/Master’
Operating mode ‘Slave’
Operation
PAR64 10MM UV
23