Stairville Octagon Theater CW/WW 36x1W, Руководство пользователя

Страница: 28 / 44

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘DMX’ . Press [OK] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use the arrow buttons to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ).
When the display shows the desired value press [OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Make sure that this number matches the configuration of your DMX controller. For the 5-
channel DMX mode, the highest possible start address is 508.
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘COLD’ , ‘STRO’ or ‘WARM’ .
Press [OK] .
In this stand-alone mode, you can change the speed of the strobe effect in the range of 0 (no
speed) to 24 (high speed) and the dimmer settings for cold and warm white (range 0 to 255).
DMX address
Manual test
Operating
LED PAR
28