7
Operating
7.1 Starting up the device
Perform the following steps to start the operation:
1.
Verify that all required laser safety precautions have been taken. Make sure that there is
no one in the reach of the laser beam.
2.
Connect an external safety switch
[REMOTE]
(10) to the port (e.g. emergency stop) or any
other installation using a protection function.
3.
Insert the safety key into the lock (9) and turn it into the ‘OFF’ position.
4.
If not already connected, connect the device to the mains (5).
5.
After a few seconds, the fan and the motors start to work. The display shows the current
operation mode. The device is now operational.
Operating
DJ Lase GR-140 RGY MKII
39
Содержание DJ Lase GR-140 RGY MKII
