Stairville Crazy Par Bundle4 8x5W RGBWAP, Руководство пользователя

Страница: 33 / 60

A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Pro’ . Press [Setup] . Now you can select one of
the preprogrammed automatic shows. Use [Up] and [Down] to select a value between ‘Pr.01’
and ‘Pr.38’ .
Settings for programme 01:
For
‘Pr.01’ , you can choose from 16 basic colours, maximum intensity or blackout of all LEDs.
Press [Setup] . With [Up] and [Down] you can now select a value between ‘1.--r’ and ‘16.ON’ or
‘OFF’ .
To adjust the strobe frequency, press [Setup] . With [Up] and [Down] you can now select a value
between ‘SPFS00’ (slow) and ‘FS99’ (fast).
Settings for programmes 02 … 38:
To adjust the speed of the selected automatic show, press
[Setup] repeatedly until the display
shows ‘SPxx’ . With [Up] and [Down] you can now select a value between ‘SP.01’ (slow) and
‘SP.99’ (fast) or ‘SP.FL’ .
To adjust the strobe frequency, press [Setup] repeatedly until the display shows ‘FS.xx’ . With
[Up] and [Down] you can now select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operating
Crazy Par Bundle4 8x5W RGBWAP
33