Stairville CLB5 RGBW, Руководство пользователя

Страница: 40 / 60

Press [Mode] repeatedly until the display shows ‘Set’ . [Setup] . Use [Up] | [Down] to select the
menu item ‘FAIL’ and confirm with [Setup] . With [Up] | [Down] you can choose how the device
behaves in case of a disturbed DMX transmission: ‘HoLd’ (the current state is retained) and ‘-
OFF’ (device blackout). Confirm the selection with [Setup] .
Press [Mode] repeatedly until the display shows ‘Set’ . [Setup] . Use [Up] | [Down] to select the
menu item ‘Sync’ and confirm with [Setup] . With [Up] | [Down] you can choose how connected
devices behaves in case of a disturbed DMX transmission: ‘On’ (devices are synchronised with
each other) and ‘Off’ (no synchronisation). Confirm the selection with [Setup] .
Press [Mode] repeatedly until the display shows ‘Set’ . [Setup] . Use [Up] | [Down] to select the
menu item ‘Hey’ and confirm with [Setup] . With [Up] | [Down] you can enable ( ‘On’ ) or disable
( ‘Off’ ) a wireless foot switch. Confirm the selection with [Setup] .
Press [Mode] repeatedly until the display shows ‘InFo’ . Press [Setup] , the display shows ‘Ver’ .
Press [Setup] to let the device show the Firmware version.
Behaviour on DMX failure
DMX synchronisation
Enabling a wireless foot switch
Firmware version
Operating
LED lighting set
40