Stairville BossFX-1, Руководство пользователя

Страница: 13 / 36

The two spots, the two derby effects and the laser are pre-assembled at the T-bar.
The strobe LEDs are integrated in the T-bar. Only the tripod is still to be attached and
the foot switch unit has to be connected.
Press the lock of the battery holder to the centre of the housing and pull out the bat-
tery holder like a drawer. Insert the battery. The battery is correct if the positive pole
points to the housing base of the remote control. Slide the battery holder back into
the remote until it clicks into place.
When shipping, the battery is already installed in the remote and protected against
discharge by a transparent plastic foil. Remove the plastic foil prior to first use.
Pre-mounted spots
Inserting the battery into the remote
control
Installation
LED BossFx-1 Bundle
13