manualshive.com logo in svg

Stairville Blade Sting 8 RGBW Beam Mover, Руководство пользователя

Поделиться
Скачать
Stairville Blade Sting 8 RGBW Beam Mover Скачать руководство пользователя страница 14

CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright

light. This is also valid immediately after you turn on the device, when the device

operates in automatic mode or under remote control and when you turn off a

DMX controller that is connected to the device. Persons staying near the device

could be injured or frightened.
Before you turn on the device and during the operation, always ensure that

nobody stays close to the device. If work has to be performed in the area of move‐

ment or in the near vicinity of the device, it must remain turned off.

NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near

any direct heat source. Keep the device away from naked flames.

Safety instructions

 

 

moving head

14

Содержание Blade Sting 8 RGBW Beam Mover

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды