Stairville AFH-600, Руководство пользователя

Страница: 26 / 40

This mode can only be selected when no DMX controller is connected and turned on.
Press
[FUNC] repeatedly until the display shows ‘SLNd’ . Press [ENTER] . Now you can use the
arrow keys to choose from the following options:
n
‘NASt’ : The device works as ‘Master’ and controls other devices that follow as ‘Slave’.
n
‘SLAu’ : The device follows as ‘Slave’ exactly the operation of the ‘Master’ to which it is con‐
nected.
Press [ENTER] to confirm and to start operation in ‘Master / Slave’ mode.
Press [FUNC] repeatedly until the display shows ‘Addr’ . Press [ENTER] . Now you can set the
number of the first DMX channel to be used by the device (DMX address). Use the arrow keys
to select a value between 1 and 512. Press
[ENTER]
to save the value and to start operation in
‘DMX’ mode.
Make sure that this number matches the configuration of your DMX controller.
Operating mode ‘Master / Salve’
Operating mode ‘DMX’
Operating
hazer
26