Stairmaster HIITMill X, Инструкция по установке, Страница: 5 / 10

3
STEP 1:
NOTE
: The user left side handrail is attached to the lower
frame via the brake cable.
DO NOT
pick the unit up until after
securing the handrail to the frame.
NOTE: Do not tighten any hardware until instructed to do so.
With a 5mm allen key, remove the two (2) screws and washers se-
curing the flywheel guard to the frame then slide the user left side
handrail between the frame and the flywheel guard.
CAUTION
: Take care not to pinch or damage the brake cable
when installing. Feed any excess cable back into the frame and/or
STEP 2:
Use a 5mm allen key to secure the flywheel guard to
the frame and user left side handrail using the screws and wash-
ers removed in step one. DO NOT FULLY TIGHTEN YET . Once the
flywheel guard is secured, use a 6mm allen key to secure three (3)
pieces each of the M10 x 25mm screws and M10 flat washers. DO
NOT FULLY TIGHTEN YET.
STEP 3:
Install the user right side handrail, use a 6mm allen key
to secure three (3) pieces each of the M10 x 25mm screws and M10
flat washers. DO NOT FULLY TIGHTEN YET.
Assembly Instructions