Page 57
PARTS REMOVAL AND REPLACEMENT
BRAKE SYSTEM
Brake Actuator Arm
1.
Remove the left side cover.
2.
Remove the brake cam mounting screw from the top of the brake
actuator arm.
3.
Loosen the jam nut from the center of the actuator arm, and remove
the lower screw (see Figure 13).
4.
Install the new arm.
5.
Use the brake actuator spring nut and /or the lower mounting nut to
adjust the throw on the arm to properly engage/disengage the brake
(see Figure 13).
Brake Motor
1.
Remove the left side cover.
2.
Remove the brake actuator arm.
3.
Remove the brake cam mounting screw and slide the cam off the
brake motor shaft (see Figure 13).
4.
Unplug the motor cable from the power control board, remove the
mounting bolts from the motor, and remove the motor from the frame.
5.
Install the new motor and reassemble the machine.
6.
Use the brake actuator spring nut and/or the lower mounting nut to
adjust the throw on the arm to properly engage/disengage the brake
(see Figure 13).
Содержание FREERUNNER 5600
