CAD-CUT, Thermo-GRIP, Gorilla Grip II, Magic Mask, Samurai, Hotronix and Hot One are
®
trademarks of Stahls’ with one or more
patents or patents pending. © Stahls’ Inc. 2007.
CUTTER
GUIDELINES
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance for
conditions not under manufacturer’s control. Before using, please determine the suitability of product for its intended use.
The user assumes all risk and liability whatsoever in connection with the use of this product. Seller’s and manufacturer’s only obligation shall be to
replace such quantity of the product proved to be defective by manufacturer.
Blade
Force
Offset
60°
45°
120-170g
150-170g
.50
.25
Roland GX-24
45°
H20-007
220g
12
Allen
Datagraph
MB 37°
130 g
25-30
NOTES — Cutting
1. Test the adjustments on your cutter before pro-
duction. Based on the variety of cutters, different
force and blade lift settings may be necessary for
your machine.
2. Remember to “mirror” the image before cutting.
3. For best results, do not cut graphics smaller than
1”. For detailed designs or smaller graphics, use
CAD-CUT
®
Gorilla Grip
®
II.
NOTES — Application
1.
For Die-Cuts:
If Thermo-Tape is used during
application, tack lettering for 1-2 seconds only.
Remove the tape carefully and reseal for the
proper amount of time.
2.
For Die-Cuts:
Be careful aligning symmetrical-like
letters and numbers such as A, E, H, T, 1, 8 and 0.
Make sure the textured side is up (solid color) with
the adhesive side down.
45°
275-300
15 (Default)
100
CC-08 11/08
9995223
StahlsID.com
800.4.STAHLS
StahlsCanada.com
800.521.5255
