Stahls A2Z HEAT PRESS, Руководство по эксплуатации, Страница: 6 / 13

ADJUSTING TEMPERATURE, TIME &
PRESSURE
With the print handle in the raised position,
rotate the knob to adjust PRESSURE.
Flip the power switch on the back of the cont-
roller to turn on the heat press.
Press MODE once to change the TEMPERATURE.
While SET and TEMP are illuminated, press (+)
and (-) buttons to adjust the TEMPERATURE.
Lower the print handle into the locked position
to test your PRESSURE and adjust as needed
until the desired level is achieved.
While no LEDs are illuminated, the controller
displays the current heater temperature. Press the
MODE button to set the TEMPERATURE and TIME.
Press MODE twice to set the TIME. While SET and
TIME are illuminated, press (+) and (-) buttons to
adjust the TIME.
NOTE NOTE
The press will not heat while SET is illuminated. The press will not heat while SET is illuminated.