Fusion (Model XF)
Circuit Breaker Replacement
2015-12-03
Technical Assistance: 1-(800)-727-8520
Manuals: hotronix.com/heat-press-manuals
Page 3 of 4
Remove silver mounting ring from circuit
breaker using pliers if necessary, being
careful not to damage the painted finish
Transfer wire terminals one at a time from
old circuit breaker to new using #2 Phillips
Screwdriver, noting terminal connections
and circuit breaker orientation are correct as
shown
Install toothed washer and silver mounting
ring, noting amperage rating orientation as
shown
Replace housing onto press and insert 4
#8-
32 x ½” Thumb Screws (right 2 shown),
tightening with 9/32” Allen Wrench