Operating Instructions ET-xx8 / MT-xx8
Operation
Page 46 of 84
R. STAHL HMI Systems GmbH / OI_ET_MT-xx8_en_V_01_02_03.docx / 10.03.2021
11 Operation
Hot surfaces !
Non-compliance may result in minor burns.
In ambient temperatures exc45 °C the surface of the device
may heat up.
Do not touch the device.
Explosion hazard due to damaged device !
In case of damage or changes to the factory state (for example if the
device is leaking small glass beads)
Decommission device immediately.
Contact manufacturer.
Explosion hazard due to electrostatic charge !
Do not apply protective foil to touch display.
Display damage due to permanent display of identical pattern
Non-compliance may result in screen burn-in
Use screen savers or regularly move the screen pointer if a
specific pattern is displayed permanently.
11.1 Operating the touch display
Touching the touch screen with pointed or sharp items
Non-compliance may result in damage to the touch display, shorter
life-span or total breakdown !
Only operate the touchscreen with your finger or a touch pen
specifically intended for capacitive touch displays.
Incorrect operation of the touch display may result in accidental functions and errors. The device
will then be unable to execute orders, may execute them incorrectly or in a way not intended.
Do not realise safety-relevant functions via the touch display.
Avoid accidental multiple touches.
Do not touch the touch display across a large section.
Only use fingers, thin gloves or special gloves or a conductive touch pen for operation.
Before operating the device, thoroughly acquaint yourself with the multi-touch functions of
the operating system and the application.
Avoid contamination of the touch display with salt water.
WARNING
CAUTION
CAUTION
NOTE
NOTE
