129221 / 8013603300
2016-09-27·BA00·III·en·03
Mounting and Installation
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
LED Indicating Lamps for Panel Mounting
Series 8013/3
7.2.2 Assembly
Single hole mounting
Changing the colours of the actuator caps
04928E00
• Insert the lamp actuator (1) into
the installation wall (3) and
secure it in place. Ensure that
the seal (2) is seated precisely
when doing so.
• Insert the indicator lamp from
the reverse side into the lamp
actuator (1). Ensure that the
indicator lamp and lamp
actuator (1) are secured in the
installation wall (3).
• Tighten the lamp actuator (1)
against the installation wall (3)
to which it is fitted by turning the
threaded nut (4).
(Tightening torque of the
threaded nut: 2.5 Nm)
• Position the actuator cap with
the desired luminous colour.
Legend
1 = Lamp actuator
2 = Seal
3 = Installation wall
4 = Threaded nut
11354E00
• Insert a screwdriver
(blade 0.6 x 3.5 form A in
accordance with DIN 5264 or
ISO 2380-1) into the slot and
turn it.
• Pull the actuator cap out.
• Position the new actuator cap
and snap it into place.
