Installation Manual ET-/MT-xx6
Tools
R. STAHL HMI Systems GmbH / IM_ET_MT-xx6_en_V_01_00_02.docx / 23.07.2018
Page 9 of 23
5.3
Assembly notes
The tightening torques for the cable glands depend on the cables and wires used. This
means the user has to determine the required torques.
The stand / wall bracket must be mounted with at least 4 fastening points. The type of wall
fixing used must be suitable for the wall material.
6
Tools
1x side cutter
1x wire stripping knife
1x wire stripper
1x spanner AF 10
1x spanner AF 13
1x spanner AF 14
1x spanner AF 24
1x spanner AF 30
1x Phillips screwdriver size 1
1x Phillips screwdriver size 2
1x flat-bladed screwdriver 2.5 mm
1x Allen key 5 mm
Mounting the stand or wall-mounting will require other tools not
specified here.
7
Mechanical Installation
Always have two people mount the devices.
CAUTION
NOTE
