Stahl Manta GMP 400 Series, Руководство по эксплуатации

Страница: 9 / 36

Operating Instructions OS-IT-xx9 Technical data

R. STAHL HMI Systems GmbH / OI_IT_xx9_en_V_01_00_07.docx / 06.12.2019 Page 9 of 36
Display
Display-Version TFT Color display
Display version 2 16.7 million colours
Display size inch 24
Display size cm 61
Display resolution Full HD
Display total pixels 1920 x 1080
Display dimensions 16:9
Display brightness 250 cd/m²
Display contrast 1000:1
Backlight LED Technology
Life expectancy backlight 50 000 h at +20 °C / [-4 °F]
Touch screen yes, optional
Touch screen technology projected, capacitive (PCAP), multi-touch
Display Glass
horizontal viewing angle
at CR ≥ 10 = 178°
vertical viewing angle
at CR ≥ 10 = 178°
Touchscreen activation no activation pressure necessary
Touchscreen input method Finger, thin gloved finger or special gloves, conductive stylus
Touchscreen durability very good
Touchscreen scratch hardness MoHS 6
Touchscreen scratch hardness pencil
hardness test ISO 15184
9H
Touchscreen transmissivity / optics very good
Touchscreen surface contaminants Unaffected (but can be affected by conductive fluids (e.g. saltwater))
Touchscreen abrasive resistance no visible abrasion by rubber or finger
Ambient conditions
Ambient temperature, operation
0 °C … +45 °C / [+32 °F … +113 °F]
Storage temperature range -
20 °C … +60 °C / [-4 °F … +140 °F]
Cold start temperature 0 °C / [+32 °F]
Temperature note 3 Cold start temperature:
If the HMI device is switched on at a temperature below 0 °C / [+32 °F] the display will
need a certain amount of time to warm up until everything is clearly visible.
Depending on how low the temperature is, this process may last up to 3 hours.
Temperature note - general The temperature details apply to a device combination with display, keyboard and
enclosure. Any additional built-in or added components may have an impact on
/ change these.
Heat disspation about 40% via the upper front enclosure, about 60% via the back of the enclosure
Rel. air humidity 10 to 90% at +40°C [+104 °F], non-condensing
Mechanical data
Ingress Protection (IP)
IP66
Material front
Stainless steel / glass
Material back
Stainless steel
Enclosure / Design (1) GMP enclosure 15° tilted
Enclosure / Design (2) GMP enclosure vertical
Dimensions (WxHxD) (1) 673 mm x 672 mm x 370 mm / [2.21 ft] x [2.2 ft] x [1.21 ft]
Dimensions (WxHxD) (2) 673 mm x 680 mm x 373 mm / [2.21 ft] x [2.23 ft] x [1.22 ft]
Weight 21.00 kg / [46.3 lbs] 16.00 kg / [35.27 lbs]
Mechanical data note 1 At Panel PC and Thin Client devices the mechanical data apply to a system with display
and keyboard inside a GMP enclosure. Any additional built-in or added components
may have an impact on / change these.
Mechanical data note 2 At Direct Monito devices the mechanical data apply to a system with display inside a
GMP enclosure. Any additional built-in or added components may have an impact on /
change these.
Mounting/ Installation
Enclosure type Stainless steel enclosure (GMP)
Mounting option Stand, mobile stand, wall bracket, dual monitor solution
Components
Keyboard optional, 107 keys with trackball or touchpad -