264707 / 944260310010
2018-10-09·BA00·III·en·01
General Information
3
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
CPU module for Zone 2 / Division 2
Series 9442/35
1
General Information
1.1
Manufacturer
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74638 Waldenburg
Germany
Phone: +49 7942 943-0
Fax:
+49 7942 943-4333
Internet: www.r-stahl.com
E-Mail: [email protected]
1.2
About these Operating Instructions
Read these operating instructions, especially the safety notes, carefully before use.
Observe all other applicable documents (see also chapter 1.3).
Keep the operating instructions throughout the service life of the device.
Make the operating instructions accessible to operating and maintenance personnel at all
times.
Pass the operating instructions on to each subsequent owner or user of the device.
Update the operating instructions every time you receive an amendment to them from
R. STAHL.
ID-No.:
264707 / 944260310010
Publication Code:
2018-10-09·BA00·III·en·01
The original instructions are the German edition.
They are legally binding in all legal affairs.
1.3
Further Documents
• IS1 coupling descri (download from www.r-stahl.com)
• 9442/35 data sheet
• 9445/35 data sheet
• 9496/35 data sheet
• Installation of RS485
• Operating instructions for 9445/35 power module
• Operating instructions for the base for CPU and 9496/35 power modules
• Operating instructions for the Ethernet CPU and 9441/15 power module
For documents in additional languages, see www.r-stahl.com.
1.4
Conformity with Standards and Regulations
• Certificates and EU Declaration of Conformity: www.r-stahl.com.
• The device has IECEx approval. See IECEx homepage: http://iecex.iec.ch/
to view the certificate.
• Further national certificates can be downloaded via the following link:
https://r-stahl.com/en/global/products/support/downloads/.
