Operating Instructions Scanner IDM
Safety Advice
Page 14 of 36
R. STAHL HMI Systems GmbH / OI_Scanner_IDM_en_V_01_00_04.docx / 29.01.2016
Use the devices for their intended purpose only (see "Function").
Incorrect or unauthorized use and non-compliance with the instructions in this manual will void
any warranty on our part.
No changes to the devices are permitted !
The operator interfaces may only be installed and operated in an undamaged, dry and clean
condition.
9.1.1
IDM handheld scanner
For the IDM handheld scanners the points listed below apply in addition to those listed under
Installation and Operation
•
In hazardous areas the devices may not be wiped or cleaned with a dry cloth!
•
Ensure safe handling with firm footing and sufficient room for movement.
•
Devices fitted with laser fall under standards US 21 CFR 1040.10 and EN 60825-1.
•
The laser's classification is stated on a plate affixed to the device.
•
Class 1 lasers are deemed inherently safe during normal use, but users must not look
directly into the light source. The following statement is statutory under American and
international law.
Usage of control elements, adaptations or the use of procedures that differ from these
instructions may result in a dangerous exposure to rays.
•
Class 2 lasers use a visible low-voltage LED. As with any source of bright light, such as
the sun, the user should avoid looking directly into the light. Brief exposure to a Class 2
laser is considered not dangerous.
Содержание IDM160
Страница 35: ......
