Stahl FX15 Series, Руководство по эксплуатации

Страница: 24 / 32

Installation
8
218095/FX1560300010
2013-08-27·BA00·III·en·02
GRP Explosion Proof Visual
Signal 5 Joule
Series FX15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.4 Installation Conditions for Electrical Connections
Cable entry to device
7.5 Access to the PCB
Instructions
- Remove socket head screws x 6
- Lift strobe assembly and disconnect upper and lower PCB’s
- Set aside strobe assembly and upper PCB and terminal to lower PCB
WARNING
No explosion protection if non-approved cable glands are used!

Only cable glands with a corresponding certificate may be used.
They must be flameproof (Ex d), suitable for the type of cable used and
fulfil the requirements of IEC/EN 60079-14.

Cable entry temperature may reach 70 °C.

To ensure the required ingress protection, installation of the cable gland
must be performed in accordance with the manufacturer's instructions.

For unused enclosure holes use Ex d stopping plugs, for unused cable
glands Ex d plugs. Make sure that these components have an appropriate
approval and fulfil the requirements of IEC/EN 60079-14.

All threaded cable entries to be fitted with an appropriately certified
component and the thread sealed with a suitable non-setting thread
sealant to maintain IP 66 rating.
15755E00
1 Socket head screws
2 Strobe assembly
3 Sealing O ring
4 Flash tube, attached to upper PCB
5 Cheese head screws
6 Lower PCB
7 Device base
Exploded diagram accessing the PCB FX15
1
2
3
4
5
6
7