266665 / 640960300140
2018-11-09·BA00·III·en·00
Mounting and installation
23
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency Luminaire with LED
Series EXLUX 6409/4
Opening and closing the reflector plate
15448E00
15451E00
15436E00
• Remove the closing cap of the
central lock.
• Turn the central lock using a box
spanner M8, spanner size 13,
by 90° to the left as far as it will go.
• Swivel down the translucent cover.
• Proceed in reverse order to close.
• The seal of the translucent cover must
lie correctly on the sealing edge.
• Push the closing cap onto the central
lock opening (protection against dirt).
Observe the following during mounting and dismounting:
• Version without switch: Disconnect the luminaire from the power supply,
secure it against being switched on again and open the battery case in
order to disconnect from the battery voltage.
• Do not use force when opening or closing the enclosure.
Central lock
• Version with switch: The luminaire is positively disconnected from the
power supply by actuating the central lock.
• In open end position and with translucent cover swivelled down,
an anti
-
pumping device prevents the central lock from being actuated.
15512E00
Opening:
• Open the reflector plate by
pressing down on the
safety latch (1).
• Swivel down the reflector
plate (2).
Closing:
• Flip up the reflector plate
and snap it into place.
165°
170
90°
1
2
