Stahl 9432 Series, Руководство по эксплуатации

Страница: 34 / 48

Mounting and Installation
10
279966 / 944560310110
2022-03-09·BA00·III·en·00
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Power module for Zone 1
Series 9445/32
6 Mounting and Installation
6.1 Mounting/Dismounting
▶
Mount the device carefully and only in accordance with the safety information
(see "Safety" chapter).
▶
Read through the following installation conditions and assembly instructions carefully and
follow them precisely.
6.1.1 Operating Position
The operating position is specified by the 9496/32 socket
(see 9496/32 socket operating instructions).
6.1.2 Mounting on the 9496/32 Socket
20016E00
▶
Mount the socket (see 9496/32 operating instructions).
▶
Check whether the spring (1) is present on the power module.
This is the only way to guarantee that heat is dissipated correctly across the socket.
▶
Only connect the power module to the intended slot (for 3-slot socket, slot 1 or 2;
for a 4-slot socket, slot 2 or 3)!
▶
Hang the power module in the bottom of the socket (1) and swivel it inward (2).
▶
Secure the power module using a safety screw (3) and a screwdriver (Torx T20).
(Tightening torque 1.5 to 1.9 Nm).
DANGER! Explosion hazard due to incorrect mounting!
Non-compliance results in severe or fatal injuries!
▶
Only mount the device on clean contact surfaces.
▶
Fit the device using safety screws.
▶
Tighten the safety screws using a tightening torque of 1.5 to 1.9 Nm.